dieselenthusiast
NAXJA Forum User
- Location
- Zuni Mountains, New Mexico
What action do I need to take? Any thoughts?
Fluid Analysis Report:
Unit ID: 2000 Jeep Cherokee
Second ID: Inline 6
Unit Type: Unleaded Gasoline Engine
Application: Transportation
Unit Mileage: 171,673
Lubricant Mileage: 2,113
Lubricant: Amsoil XLT SAE Synthetic 10W30
OVERALL SEVERITY OF REPORT: (High end of ABNORMAL)
SUGGEST performing cooling system pressure check. Lubricant and filter change is suggested if not done at sampling time. Coolant indicators (Sodium, Potassium) are at a significant level. Flagged additive levels are different than what should be present for the lubricant that is identified for this unit. Please provide unit model number so we may compare data to the proper standards for this unit; Replace oil filter and top off system with fresh make-up oil if not done when oil sample was taken. Re-sample in 3,500 miles or 65 hours. Resample in 30 days.
Areas that are flagged:
CONTAMINANT METALS:
Sodium: 41 PPM (High end of NORMAL)
Potassium: 197 PPM (High end of ABNORMAL)
MULTI-SOURCE METALS:
Molybdenum: 8 PPM (Low end of ABNORMAL)
Manganese: 27 PPM (High end of NORMAL)
Boron: 41 PPM (Low end of ABNORMAL)
ADDITIVE METALS:
Magnesium: 584 PPM (Low end of ABNORMAL)
Zinc: 1063 PPM (Low end of ABNORMAL)
Fluid Analysis Report:
Unit ID: 2000 Jeep Cherokee
Second ID: Inline 6
Unit Type: Unleaded Gasoline Engine
Application: Transportation
Unit Mileage: 171,673
Lubricant Mileage: 2,113
Lubricant: Amsoil XLT SAE Synthetic 10W30
OVERALL SEVERITY OF REPORT: (High end of ABNORMAL)
SUGGEST performing cooling system pressure check. Lubricant and filter change is suggested if not done at sampling time. Coolant indicators (Sodium, Potassium) are at a significant level. Flagged additive levels are different than what should be present for the lubricant that is identified for this unit. Please provide unit model number so we may compare data to the proper standards for this unit; Replace oil filter and top off system with fresh make-up oil if not done when oil sample was taken. Re-sample in 3,500 miles or 65 hours. Resample in 30 days.
Areas that are flagged:
CONTAMINANT METALS:
Sodium: 41 PPM (High end of NORMAL)
Potassium: 197 PPM (High end of ABNORMAL)
MULTI-SOURCE METALS:
Molybdenum: 8 PPM (Low end of ABNORMAL)
Manganese: 27 PPM (High end of NORMAL)
Boron: 41 PPM (Low end of ABNORMAL)
ADDITIVE METALS:
Magnesium: 584 PPM (Low end of ABNORMAL)
Zinc: 1063 PPM (Low end of ABNORMAL)