epitaphmike
NAXJA Forum User
- Location
- Phoenix, AZ
I read a bunch of posts at 3:30 a.m. this morning when I decided to put in my new radiator before work. No one had any good solutions for not having the Quick Disconnect Tool. After some thinking, I cut about an inch and a half off of an extra hose clamp I had. I bent it around the tube coming off of the radiator, then i slid it into the quick disconnect and used a pair of vice grips to push it in and hold it. If the radiator is junk I recommend cutting the tube coming off of the radiator, it makes it easier to get to.
Hopefully this helps someone down the road.
98 Jeep Cherokee 4WD 4.0L
Hopefully this helps someone down the road.
98 Jeep Cherokee 4WD 4.0L