Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
i am pretty sure that the things that cover the bearings are side specific...anyway to tell which on is which or if there is a difference.
on says timken 255323 on it...
i am pretty sure that the things that cover the bearings are side specific...anyway to tell which on is which or if there is a difference.
on says timken 255323 on it...
It should not matter which cup goes with which cone - until they are loaded. As I recall, they are sold separately anyhow.
The caps that hold the bearings in are side specific - and you'd be well advised to mark them (either number them "1" and "2" or use dots - "." on one side and ".." on the other) and mark the bearing cap and the web. Mark them toward one end - you match up the marks side-for-side and put the mark on the same end as the web marked (top or bottom) so you don't have to get them re-bored.
Torque specs for a gradually increasing number of XJ assemblies and parts are going up on my website - I've got them by year and model for now, and I'm working on dividing them by assembly next... There's a link in my sig.