Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Picked up my new D30 4.88 gear set this past friday. I was struck by how tiny they are. Kinda scary to think of all that torque running through a gear that is a little less than 2" wide. :scared:
Picked up my new D30 4.88 gear set this past friday. I was struck by how tiny they are. Kinda scary to think of all that torque running through a gear that is a little less than 2" wide. :scared:
I would say that is a unique experiance. Sure I have seen plenty of broken d30 gears but usaully that is after brakeing multiple shafts and u-joints. I have seen a HD30 30 spline shaft let go before the 4.88 gears.
I had the same thought run through my mind when I got my gears too.
There's nothing wrong with 4.88's though. Set the gears up tight, and run a stout diff cover to prevent any deflection. The D30 isn't given enough credit in my opinion. For it's size it's a tough little axle.