paddlerdan
NAXJA Forum User
- Location
- maine
todat I attempted to sort out my 4wd to low range shift problem. I adjusted the linkage as per Hayne's book and yes I got my low range back.
BUT: As I had both axles off the ground on one side to check 4wd, I noticed that 4wd low drives both axles but 4wd hi only turns the rear!
Whats up? I dont if this was pre existing or not.
This is a bone stock 86 xj 2.8 with the 904 trans and np228 t-case.
BUT: As I had both axles off the ground on one side to check 4wd, I noticed that 4wd low drives both axles but 4wd hi only turns the rear!
Whats up? I dont if this was pre existing or not.
This is a bone stock 86 xj 2.8 with the 904 trans and np228 t-case.