cykaaro
NAXJA Forum User
- Location
- ontario, canada
Need to replace my t-case, but having never done this before, how do I do this? what do I need to watch out for? Pics and/or write up would be greatly appreciated.
thx
thx
unbolt the linkage, unplug the speedo gear and sensor, disconnect the vent, remove the driveshafts, drain the fluid, unbolt the 6 bolts and slide it off the splined shaft.cykaaro said:Need to replace my t-case, but having never done this before, how do I do this? what do I need to watch out for? Pics and/or write up would be greatly appreciated.
thx
Kejtar said:unbolt the linkage, unplug the speedo gear and sensor, disconnect the vent, remove the driveshafts, drain the fluid, unbolt the 6 bolts and slide it off the splined shaft.
cykaaro said:I've got the t-case/tranny lowered already, The front DS is gone, so just have to remove the back.
Where the linkage connects looks like it's got some metal bracket that goes over top of where it bolts on? Does that just unbolt each side and come off? Was able to see the side bolt but not the top ones?? This is what has me confused.