AKswampheep
NAXJA Forum User
- Location
- INDIANER
As of now i have a 1990 cherokee with the 242 TC. I am ready for a new platform so im just junking the old "body" and buying a 97-99 XJ. It will have the 231 TC. I have a custom SYE done on my 90 with a "ebay" corvette yoke, RE seal housing, and a Grand Cherokee front driveshaft.
Anyways, whats the difference in the length from output shaft to rear pinion of the 242 from the 231. And also is the spline count the same on both the transfer cases? I would like to swap everything over from my 90 to my 97-99 without too much trouble.. though i know its always more fun than it has to be, also the 242 cannot be swapped into the newer one because the 242 is grenadededed
Anyways, whats the difference in the length from output shaft to rear pinion of the 242 from the 231. And also is the spline count the same on both the transfer cases? I would like to swap everything over from my 90 to my 97-99 without too much trouble.. though i know its always more fun than it has to be, also the 242 cannot be swapped into the newer one because the 242 is grenadededed