howephillip
NAXJA Forum User
- Location
- Vernal, UT
I just rebuilt my 2000 and can't seem to diagnose a no crank.
The starter relay is triggering when the key is turned so doesn't that rule out the NSS?
I also have a relay with the cover off that I can manually trigger and nothing is happening. Other known good relays aren't making a difference.
If I bridge the starter it spins, so I confirmed the starter is good. But it doesn't even click to indicate a typical bad starter so that tells me no signal.
There is continuity from the relay pin 2 and there is 12v on pin 3
Getting 0.00 ohms from battery to block and block to body. Tested various spots.
Sorry for another no crank thread... would have piggybacked on the other one from today but my wires aren't severed.
The starter relay is triggering when the key is turned so doesn't that rule out the NSS?
I also have a relay with the cover off that I can manually trigger and nothing is happening. Other known good relays aren't making a difference.
If I bridge the starter it spins, so I confirmed the starter is good. But it doesn't even click to indicate a typical bad starter so that tells me no signal.
There is continuity from the relay pin 2 and there is 12v on pin 3
Getting 0.00 ohms from battery to block and block to body. Tested various spots.
Sorry for another no crank thread... would have piggybacked on the other one from today but my wires aren't severed.