Markm80521
NAXJA Forum User
- Location
- Florida
I have an '88 jeep Cherokee with a 231 xfer case. I am moving to Florida from Colorado and would like to sell these things (not much in the way of rocks in Florida).
The transfer case skid WILL NOT fit a NP249!
The stats from the website:
Transfer case - NEW PRICE is $100 - Our transfer case skid plate for your XJ Cherokee or ZJ Grand Cherokee is much stronger than the factory part (if you got one! ) and protects one of the most vulnerable parts of your drivetrain. It is designed to work with lowered transmission cross-members and includes a drain hole to make maintenance easier. The three mounting bolts that attach the skid to the cross-member are grade 5 carriage bolts to help prevent damage to the bolt heads and make the bottom of your Jeep a just a little bit smoother. The skid plate is made from 3/16" thick steel and comes powder coated in semi-gloss black for a durable and attractive finish.
Engine Skid - NEW PRICE is $225 - Mounted in three locations, it provides you with the best protection you can get for your Cherokee. And you don't have to remove it to change your oil! This engine skid plate mounts to the transmission cross-member at the rear. On the passenger side it mounts using the bolt for the lower control arm. On the driver's side there is a two piece mounting hoop that goes over the driveshaft and attaches to the lower control arm bolt also. All of this makes for a very sturdy skid plate that gives you plenty of clearance for your driveshaft and exhaust.
These are 1 year old and are not dented in any way. Looking for a local (colorado) buyer but I can ship as well. I will be leaving them with my little brother. IF YOU ARE IN FLORIDA OR ON MY WAY I CAN MEET YOU!
----------------FIRM------------------
ENGINE SKID - $100
XFER SKID - $35
Send me a PM and let me know!
http://www.skidplates.com/skid_plates_84_01_XJ.htm
The transfer case skid WILL NOT fit a NP249!
The stats from the website:
Transfer case - NEW PRICE is $100 - Our transfer case skid plate for your XJ Cherokee or ZJ Grand Cherokee is much stronger than the factory part (if you got one! ) and protects one of the most vulnerable parts of your drivetrain. It is designed to work with lowered transmission cross-members and includes a drain hole to make maintenance easier. The three mounting bolts that attach the skid to the cross-member are grade 5 carriage bolts to help prevent damage to the bolt heads and make the bottom of your Jeep a just a little bit smoother. The skid plate is made from 3/16" thick steel and comes powder coated in semi-gloss black for a durable and attractive finish.
Engine Skid - NEW PRICE is $225 - Mounted in three locations, it provides you with the best protection you can get for your Cherokee. And you don't have to remove it to change your oil! This engine skid plate mounts to the transmission cross-member at the rear. On the passenger side it mounts using the bolt for the lower control arm. On the driver's side there is a two piece mounting hoop that goes over the driveshaft and attaches to the lower control arm bolt also. All of this makes for a very sturdy skid plate that gives you plenty of clearance for your driveshaft and exhaust.
These are 1 year old and are not dented in any way. Looking for a local (colorado) buyer but I can ship as well. I will be leaving them with my little brother. IF YOU ARE IN FLORIDA OR ON MY WAY I CAN MEET YOU!
----------------FIRM------------------
ENGINE SKID - $100
XFER SKID - $35
Send me a PM and let me know!
http://www.skidplates.com/skid_plates_84_01_XJ.htm