subtle_driver
NAXJA Forum User
- Location
- Ramona
I have a 95 XJ with an automatic with a hot running condition. The needle almost touches the red zone on the gauge, but stays past the middle after warm up and never goes back. it just hovers there.... It creeps me out. I'm trying to figure out what the problem is, because this is for my GF, and I don't want her getting stuck somewhere at night. LOL!iratefla
OK, I replaced the water pump, t-stat, 3-row copper radiator, backflush and new coolant 50/50, fan clutch, bled the cooling system, no leaks, runs great. Hovers at the high temp even though it is at idle and driving at all speeds. I replaced the t-stat with a heavy duty unit, but with the same results. NO change...
I read through the forums for hours, but I am not getting any closer.... I was thinking it was a temp sensor, what else commonly goes out on these beasts?
Any help would be great! Thank you!!!
OK, I replaced the water pump, t-stat, 3-row copper radiator, backflush and new coolant 50/50, fan clutch, bled the cooling system, no leaks, runs great. Hovers at the high temp even though it is at idle and driving at all speeds. I replaced the t-stat with a heavy duty unit, but with the same results. NO change...
I read through the forums for hours, but I am not getting any closer.... I was thinking it was a temp sensor, what else commonly goes out on these beasts?
Any help would be great! Thank you!!!