Don Becker
NAXJA Forum User
- Location
- Beaverton, Oregon
I'm replacing the right front door on one of my 88XJ's. I got the old door off but it was quite a "fight" getting the 40mm torx socket and ratchet aligned on the torx bolts (the forward-most ones) for removal, even with the stop-device removed and the door fully open. I can imagine putting them back in will be pure misery. I'm imagining, somewhere, there's some tool that will get inside there better and won't be quite so long as the length of the torx socket plus the ratchet thickness . . . . also, for adequate tightening, I'm going to need to achieve some serious leverage . . . . any ideas/experience/help . . . . Thanks! Don