jeepcrazed
NAXJA Forum User
- Location
- Dacula, GA
Anyone here have the hydro assist kit (I bought the SP230 kit) that could send me a pic of how they mounted the pump? I've got a '91 XJ and need to fab up the bracket to make it work correctly.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
PSC Pump bracket mounting
- Thread starter jeepcrazed
- Start date
jeepcrazed
NAXJA Forum User
- Location
- Dacula, GA
Actually it's the SK230.
jeepcrazed
NAXJA Forum User
- Location
- Dacula, GA
Well, the kit comes with a bracket but it's obviously not made to fit on my setup. I don't have the tension pulley, mine adjusts by prying on pump bracket to tighten the belt. I had to mount the bracket with only two bolts but it won't stay tight and allows the pump to move slightly. Here's the only pic I have right now. http://www.sjmembers.com/gallery/Project-XJ/PSC_pump I need to figure out a better method and wanted to know if anyone else had a similar issue.
jeepcrazed
NAXJA Forum User
- Location
- Dacula, GA
Well, here's a link to how the PSC bracket is supposed to work with the orginal brackets. Problem resolved. Hope this might help others who purchase the kit. (FYI - So far this kit has been flawless on the trail.)
http://www.sjmembers.com/gallery/Project-XJ/XJ_PS_Bracket
http://www.sjmembers.com/gallery/Project-XJ/XJ_PS_Bracket
