iluv83vettes
NAXJA Forum User
- Location
- Houston
I just made a harness following the write up on goJeep's website. Followed the directions exactly. The driver's side light works properly, but the passenger side is messed up. For reference its a 99 with fog lights (I read about the sticking hi/low but this seems a little different), and if I need to get rid of the fog light fuses and relays that's fine because they are broken. I used the original passenger plug to activate the relays.
Anyway, now the passenger side headlight high beam is on when the headlight switch is off. Both the high and low beams are on when you turn on the low beam, and the light is completely off in the high beam position.
I rechecked my wiring to make sure I didn't wire it up backwards and searched before posting. I tested the plug with a multimeter to see which lights were on and when.
Anyway, now the passenger side headlight high beam is on when the headlight switch is off. Both the high and low beams are on when you turn on the low beam, and the light is completely off in the high beam position.
I rechecked my wiring to make sure I didn't wire it up backwards and searched before posting. I tested the plug with a multimeter to see which lights were on and when.