BobCSmith
NAXJA Forum User
- Location
- Phoenix, AZ
We just completed a custom LA lift using new skyjacker 6" springs front and rear. We recently found out the skyjacker 6" rear springs are actual 5.5", and we need a different shackle to gain the .5" back, currently were running stock shackle.
Our is the front passenger side is sitting a little over an 1 to an 1.5" or so lower than the driver side. Our only thought is we may have gotten a bad spring, but we find this unlikely. We also tried an experiment and jacked up one corner of the rear. It did straighten out the front, but we weren't sure how this actually helped us track down the problem.
What would cause this?
And what are the numbered steps finding the problem?
Thanks
Our is the front passenger side is sitting a little over an 1 to an 1.5" or so lower than the driver side. Our only thought is we may have gotten a bad spring, but we find this unlikely. We also tried an experiment and jacked up one corner of the rear. It did straighten out the front, but we weren't sure how this actually helped us track down the problem.
What would cause this?
And what are the numbered steps finding the problem?
Thanks