Sean B.
NAXJA Forum User
- Location
- Schenectady, NY
New baby, lack of time and change of priorities force me to do this…..
My 1987 project XJ must go……..
4.0 with about 50 to 60 k on it (new motor a few years ago… about 140k on chassis)
original AW4 automatic
NP-242 (select-trac)
Roof is CUT OFF (but I still have the roof if you want it)…. All glass has been removed (except the windshield)
Full (factory) gauge cluster
MSD-6t ignition upgrade with blaster-2 coil
Borla header, Borla cat-back and Catco SS catalytic converter
K&N cone filter with custom snorkel (needs new connector tube)
Upgraded master cylinder and dual-diaphragm booster (I used to have 4-wheel disc brakes on it)
Has two poly racing bucket seats in it (front)… but no rear seat
Custom 4x4 front winch bumper (but no winch)
Custom made (by me) rear bumper with D-ring pull points
$250 firm………
will not part-out (see lack of time above)…. Must take the whole thing
now here’s the catch…… there are NO AXLES on it…. You MUST flat-bed it out of here on either trailer or flatbed truck.
Located in Schenectady, NY….. about 3 hours north of NYC….. about 4 ½ hours east of Buffalo… about 4 hours west of Boston
edited to add.....
anyone seriously interested can e-mail me at [email protected]
Sean B.
Schenectady, NY
My 1987 project XJ must go……..
4.0 with about 50 to 60 k on it (new motor a few years ago… about 140k on chassis)
original AW4 automatic
NP-242 (select-trac)
Roof is CUT OFF (but I still have the roof if you want it)…. All glass has been removed (except the windshield)
Full (factory) gauge cluster
MSD-6t ignition upgrade with blaster-2 coil
Borla header, Borla cat-back and Catco SS catalytic converter
K&N cone filter with custom snorkel (needs new connector tube)
Upgraded master cylinder and dual-diaphragm booster (I used to have 4-wheel disc brakes on it)
Has two poly racing bucket seats in it (front)… but no rear seat
Custom 4x4 front winch bumper (but no winch)
Custom made (by me) rear bumper with D-ring pull points
$250 firm………
will not part-out (see lack of time above)…. Must take the whole thing
now here’s the catch…… there are NO AXLES on it…. You MUST flat-bed it out of here on either trailer or flatbed truck.
Located in Schenectady, NY….. about 3 hours north of NYC….. about 4 ½ hours east of Buffalo… about 4 hours west of Boston
edited to add.....
anyone seriously interested can e-mail me at [email protected]
Sean B.
Schenectady, NY
Last edited: