stewmac
NAXJA Forum User
- Location
- Vancouver, BC
Hello,
I am new here so I hope I am posting this thread in the right spot! Anyway, I have an 88 Comanche with a 5 inch lift. The lift has been in there for close to two years now and since day one, I've had this really annoying shake (seems like it's verticle, not horizontal). It's not Death Wobble (I've been there before!!). It only happens at higher speeds. Everything in the front end is tight and I've replaced everything that even had a trace of wear. I've also tried 4 different sets of wheels/tires at all different sizes and have the same issue. So, here are some question I have:
1) My passenger side Coil is sitting right against the Steering Knuckle (IS THIS OK?)
I was thinking that maybe when the coils are moving they are grabbing the knuckle and pulling it up and down slightly causing the "Jackhammer Affect."
2) My driver side front lower shock bushings get destroyed in less than a week when replaced. What's up with this?
3) Will setting the toe-in slightly help this problem?
Thanks in advance!!!
I am new here so I hope I am posting this thread in the right spot! Anyway, I have an 88 Comanche with a 5 inch lift. The lift has been in there for close to two years now and since day one, I've had this really annoying shake (seems like it's verticle, not horizontal). It's not Death Wobble (I've been there before!!). It only happens at higher speeds. Everything in the front end is tight and I've replaced everything that even had a trace of wear. I've also tried 4 different sets of wheels/tires at all different sizes and have the same issue. So, here are some question I have:
1) My passenger side Coil is sitting right against the Steering Knuckle (IS THIS OK?)
I was thinking that maybe when the coils are moving they are grabbing the knuckle and pulling it up and down slightly causing the "Jackhammer Affect."
2) My driver side front lower shock bushings get destroyed in less than a week when replaced. What's up with this?
3) Will setting the toe-in slightly help this problem?
Thanks in advance!!!