Hickey
NAXJA Forum User
- Location
- Magna, Utah
I thought some of you might appreciate this. The holes might be exact, so you might want to drill your holes a little big. I used 1/4" thick, but IMO 3/16 would be plenty. Everything is measured from the front edge of the frame horn, back to the center of each hole. I took my square off of that edge. The line on the far left is an extra 1/2" of material beyond the frame length. The second line from the left represents the frame edge. Your feedback is appreciated.
If you can't read some of the measurements, try importing the pic into Windows Paint, that might help.
If you can't read some of the measurements, try importing the pic into Windows Paint, that might help.