cykaaro
NAXJA Forum User
- Location
- ontario, canada
Just put on my factory skid plate this morning, afterstripping it down and recoating it. Well, in the process I noticed a strange leaking. I feared it was the brake line, but that's all ok. Seems looking closer at it, it seems to be dripping out of the axle tube. It's only on the driver side though, not the passenger side. It's a '90 XJ 4.0, dana30 front. The fluid looks like oil in colour. Was thinking maybe have a blown seal or something? Need to do the u-jionts end of the montb as it is. Wondering if it's a seal, replace it then? Do I need to start worrying about it? or will I be ok until then?
I've never opened either transfer case, nor did anything with then at the present, altnough when I turn I hear noise, which figure is my worn u-joints that I need to replace.
Any help on this and what I need to do is greatly appreciiated.
TIA
I've never opened either transfer case, nor did anything with then at the present, altnough when I turn I hear noise, which figure is my worn u-joints that I need to replace.
Any help on this and what I need to do is greatly appreciiated.
TIA