Jeepspeed Part Out

[chris_amrein]

Pics here: http://www.jeepspeed.net/smf/index.php?topic=4927.0

Local pick up only. I work in Chino and live in Fullerton so I can meet in either location. Also looking for a decent running Comanche only requirement is the 4.0L. Thanks!

Body/cage - $2400
Fiberglass fenders/hood/Autofab hood pins - $300
Stock motor w/ Gibson header - $400
UMP air intake - $300
Currie motor mounts and fabricated frame and motor plates - $250
AX-15 w/ Centerforce clutch - $250
NP231 W/ SYE - $150
Trussed Dana 30/Samurai hybrid front axle w/ 3rd member (not complete) - $250
Trussed Ford 9 inch w/ 35 spline axles - $500
Trussed/gusseted 2wd beam - $400
CV front/rear driveshafts - $50/$100
Fabtech upper/lower links and drop bracket - $200
Fabtech Dirt Logic 2.5 x 10/14 inch travel shocks - $1000
Fabtech Dirt Logic front bumpstops - $200
Steel braided brake lines -$50
Cromoly steering and Track bar - $200
Teraflex passenger high-steer knuckle - $200
22 Gallon fuel cell w/ filler, pump, and braided lines - $250
Crow window nets - $50
Autometer in-dash tach - $50
Race radio and intercom - $800
Misc lights, bumpers, hardware, etc. -???

 

[chris_amrein]

Sorry pics are here:

http://www.jeepspeed.net/smf/index.php?topic=2279.0

 

[karstic]

Chris I'll take the bumpstops.

Is the car in Fullerton or out in Chino?

 

[karstic]

I may be interested in some of the other misc stuff as well.

 

[CJCOffroad]

Pictures and Specs for the rear axle?

 

[JC93XJ]

interested in the control arms and drop brackets. I don't see Any pictures in the links.


Thanks

 

[camojeep88]

pics and info on the dana 30 front axle please

 

[socal_xj]

I'm interested in the steering Pmed

 

[CaliXJ]

yr and miles on the motor? Any issues?

 

[tone]

2nd on bumps

 

[sidewaysstarion]

What spline count is the NP231?

 

[Chip Clip]

PMd

 

[GrimmJeeper]

smokin deal on that fuel cell

 

[caxj91]

Fenders and hood still available

 

[Papercut]

What are the measurements on the fuel cell?

 

[Icemans]

Interested in race radio and intercom. What are the specs??

 

[chris_amrein]

Chris I'll take the bumpstops.

Is the car in Fullerton or out in Chino?

Karstic -

Everything is in Fullerton. Let me know when you'd like to come by.

 

[chris_amrein]

Pictures and Specs for the rear axle?

Stock width rear 9" with 35 spline axle and 9/16" studs. It has a truss across the back of it.

 

[chris_amrein]

Interested in race radio and intercom. What are the specs??

I'll get specs on it tonight. Can't remember details off the top of my head.

 

[chris_amrein]

What are the measurements on the fuel cell?

I'll measure and post tomorrow.