benulis55
NAXJA Forum User
- Location
- pottsville, pa
I am very frustrated with my jeep
here are the symptoms
starts fine, idles good, drives good, then all of a sudeen it will start sputtering. I can stop, and get on the road again, and within a minute of so it will start doing it again
it runs better at high RPM, this usually happens in the low/mid range
I have to install two things that are missing, the vacuum canister, and the O2 sensor behind the CAT
it throws codes for the O2 sensor and P0132 cam positioner sensor. In my chilton, the cam positioner sensor is the "coil pickup" because the 4.0 does not technically have a cam position sensor
i already replaced the TPS and CPS, though the CPS has a poor connection at the clip, I am fixing that now and also installing the vacuum canister and exhaust (the exhaust fell off awhile ago, thats why there is no O2 sensor. It fell off right before the CAT)
here are the symptoms
starts fine, idles good, drives good, then all of a sudeen it will start sputtering. I can stop, and get on the road again, and within a minute of so it will start doing it again
it runs better at high RPM, this usually happens in the low/mid range
I have to install two things that are missing, the vacuum canister, and the O2 sensor behind the CAT
it throws codes for the O2 sensor and P0132 cam positioner sensor. In my chilton, the cam positioner sensor is the "coil pickup" because the 4.0 does not technically have a cam position sensor
i already replaced the TPS and CPS, though the CPS has a poor connection at the clip, I am fixing that now and also installing the vacuum canister and exhaust (the exhaust fell off awhile ago, thats why there is no O2 sensor. It fell off right before the CAT)