BrettM
NAXJA Forum User
- Location
- michifornia
okay, I'm about to order my ram and hoses, and I just want to double check to see if anyone sees any problems. I will drill and tap the box to 1/4 npt. I will still need to pick up 4 90deg 1/4npt fittings and some steel to mount the ram. I have a Waggy D44 up front.
Ram: 1.125 bore, 7.5" stroke, .75" shaft. I've heard of eve 1.5" rams being a little too slow, and I'm only running 35s, so I think the 1.125" bore will be great. There should be plenty of stroke, and the .75" shaft is the same thickness as on many of the 1.5" rams.
Lines: 1/4x 36" lines, 1/4nptm on both ends. doing a bunch of searching it seems that everyone is happy with 1/4" lines, even with 1.5 and 2" bore rams. 36" is enough length for my setup, and I got a 3rd line as well for a spare.
so, any input?
if you go to this link there is a picture that has the part numbers from Surplus Center on it: http://www.pirate4x4.com/forum/showthread.php?t=263691
Ram: 1.125 bore, 7.5" stroke, .75" shaft. I've heard of eve 1.5" rams being a little too slow, and I'm only running 35s, so I think the 1.125" bore will be great. There should be plenty of stroke, and the .75" shaft is the same thickness as on many of the 1.5" rams.
Lines: 1/4x 36" lines, 1/4nptm on both ends. doing a bunch of searching it seems that everyone is happy with 1/4" lines, even with 1.5 and 2" bore rams. 36" is enough length for my setup, and I got a 3rd line as well for a spare.
so, any input?
if you go to this link there is a picture that has the part numbers from Surplus Center on it: http://www.pirate4x4.com/forum/showthread.php?t=263691