haligan
NAXJA Forum User
- Location
- Memphis, Tn.
:rattle: I am having problems with my ignition system. I parked the Jeep about 2 weeks ago and it ran fine. When I went back it would not start. The motor turns but there is no spark. I pulled the coil wire to the dist. and there was no spark there. So I pulled the ignition coil out and tested it with a multimeter. Everything tested just as the Haynes manual said it should. Coil-good. The manual then said it could be either the coil pick-up or the ICM. I assume the coil pick-up is in the dist.. It looked ok. My problem is if it is the ICM, how do I find it. The manual says it is attached to the ignition coil. It's not! I need to find it so I can replace it. Please Help. Oh yea I also replaced the dist. cap and rotor today. It aslo has Jacobs 8.5mm wires. and a Optima battery.HELP!
Brian
Brian