- Location
- Central Maine
tried firing up the new project and after getting spark and fuel it wouldn't catch, shot ether in the intake and it started for a sec, then realized the gas was at least 4 years old, syphoned out 7 or so gallons (tank was less than half full if the gauge was right) and then put in a fresh five with cleaner (gauge read 1/4 after)and it still won't catch, but wants to..seems like it's still pulling bad gas from the tank......
should I add more fresh gas to dillute the crap that settled to the bottom and keep cranking to get the crap gas through the system? also would like to clean the injectors, could have swore there was a kit you could get for 40-60 bucks that connects to the schrader valve? or should I remove the fuel rail and kick the pump on and spit a gallon or two from the line into a can
TIA
Doug
:smoker:
Anyone need 7 gallons of varnish?
should I add more fresh gas to dillute the crap that settled to the bottom and keep cranking to get the crap gas through the system? also would like to clean the injectors, could have swore there was a kit you could get for 40-60 bucks that connects to the schrader valve? or should I remove the fuel rail and kick the pump on and spit a gallon or two from the line into a can
TIA
Doug
:smoker:
Anyone need 7 gallons of varnish?