SPVFD47
NAXJA Forum User
- Location
- South Plainfield, NJ
I know this is a XJ and MJ forum. I've gotten alot of help here for my XJ from some very knowledgeable people here and now I help for my YJ and can't seem find it. So heres the story....
I'm having a difficult time trying to locate the correct hub assembly for my YJ. For starters, its a 90 Wrangler with a Dana 30 Front Axle. Its the stock axle too. Heres, the story short and simple. Had some play in the front wheel. Took everything apart, discovered the hub was the cause. Called Napa up gave them my info and went and picked the hub up. Put it on and everything fits and lines up and the new hub looks like the old one. Go to put the rotor on and it doesn't fit. For some reason the clearances between the old and new are different by about 3/8" between the 2 flanges. I took the hub off my Cherokee and sat the 3 side by side ( YJ old and new and XJ). The Cherokee one looks different but the clearances are the same and the hub bolts on. The next day I go back to Napa and they pull all the hubs they have in stock for YJ's TJ's and XJ's. Nothing matches my old one. There doesn't not seem to be any factory part numbers on it. I've found a few online but right now am afraid to order anything in fear of it being the same situation as Napa and not being the right hub. Heres the info off the tag on the axle. Its reads just like this.
53005567
4.10 610319-4
I was able to find out that the 610319 means a 90-90½ YJ Dana 30 Front Disconnect. Don't know what the -4 means.
The only thing I can think of is that the spindles might be different. Tellico 4x4 has a hub that looks almost identical to mine. I'm gonna call them up tomorrow and see if they have a cut see with dimensions on it.
http://www.tellico4x4.com/product_info.php/cPath/1714_314/products_id/3329
That looks like my old hub... The inner bearing isn't flush with the hub assembly like the one off my XJ.
Any help is a appreciated. Thanks in advance. Doug
I'm having a difficult time trying to locate the correct hub assembly for my YJ. For starters, its a 90 Wrangler with a Dana 30 Front Axle. Its the stock axle too. Heres, the story short and simple. Had some play in the front wheel. Took everything apart, discovered the hub was the cause. Called Napa up gave them my info and went and picked the hub up. Put it on and everything fits and lines up and the new hub looks like the old one. Go to put the rotor on and it doesn't fit. For some reason the clearances between the old and new are different by about 3/8" between the 2 flanges. I took the hub off my Cherokee and sat the 3 side by side ( YJ old and new and XJ). The Cherokee one looks different but the clearances are the same and the hub bolts on. The next day I go back to Napa and they pull all the hubs they have in stock for YJ's TJ's and XJ's. Nothing matches my old one. There doesn't not seem to be any factory part numbers on it. I've found a few online but right now am afraid to order anything in fear of it being the same situation as Napa and not being the right hub. Heres the info off the tag on the axle. Its reads just like this.
53005567
4.10 610319-4
I was able to find out that the 610319 means a 90-90½ YJ Dana 30 Front Disconnect. Don't know what the -4 means.
The only thing I can think of is that the spindles might be different. Tellico 4x4 has a hub that looks almost identical to mine. I'm gonna call them up tomorrow and see if they have a cut see with dimensions on it.
http://www.tellico4x4.com/product_info.php/cPath/1714_314/products_id/3329
That looks like my old hub... The inner bearing isn't flush with the hub assembly like the one off my XJ.
Any help is a appreciated. Thanks in advance. Doug