Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Go to the hardware store and buy some allen head bolts (the black ones), 5/16 or 3/8 whatever diameter you need. They have a round, raised head and are usually grade 8
Tractor supply has them too...
the heads on mine were a little to big for the perch on my d35, so i had to grind the head down a little bit... but alls well
good ol lathe - im going to miss the midwest and abundance of machinery over summer when i move back to the bay area...
If you don't have a lathe you can always drill the hole bigger on the spring perch if it doesn't fit. Just find a local spring shop and get the stock size 5/16" spring bolts unless you're going to drill the springs and perch out slightly and then go to 3/8". My 5/16" ones were bent each time I pulled them out so I went to 3/8" and drilled them out.