Destroyer
NAXJA Forum User
- Location
- Milton, GA
I was working on some sliders for the XJ over the weekend and this is what I came up with:
I am not so much worried about the mounting system, I think I have a good idea what I want there from reading others' posts, but I can't make up my mind on the door guard tube. The outside of the door guard is 4" off the outside edge of the rail or about 2" off the body line running down the door and angles up from the rail at 20*. There is about a .5" gap to the bottom of the open door. For reference, the main slider is 2"x2"x.25" wall tube and the door guard is 1.66"x.140" wall pipe.
Any advice is appreciated, as this is my first real fabrication attempt.
Thanks
-Destroyer
I am not so much worried about the mounting system, I think I have a good idea what I want there from reading others' posts, but I can't make up my mind on the door guard tube. The outside of the door guard is 4" off the outside edge of the rail or about 2" off the body line running down the door and angles up from the rail at 20*. There is about a .5" gap to the bottom of the open door. For reference, the main slider is 2"x2"x.25" wall tube and the door guard is 1.66"x.140" wall pipe.
Any advice is appreciated, as this is my first real fabrication attempt.
Thanks
-Destroyer