Eliminator89
NAXJA Forum User
- Location
- Winona, Mn
Cylinders #1-#4 in the 120-130psi range, #5-about 10psi and #6 about 120psi. All measured dry (no oil squirted in).
Hmmmmmmmm. Seems to be a problem here.
Time for a stroker!
I guess for now, I'll pull that piston and rod and see if I can fix it (JB Weld? ). Then this fall, I'll put together a stroker. Probably the budget 4.5. Not a lot of money to spend. Billet crankshaft, di-lithium pistons and neutronium rods would be nice but spendy.
I did find I have the AX15 tranny in there. Didn't know if it was the AX15 or the Peugot. Now I know. At least I have that.
Hmmmmmmmm. Seems to be a problem here.
Time for a stroker!
I guess for now, I'll pull that piston and rod and see if I can fix it (JB Weld? ). Then this fall, I'll put together a stroker. Probably the budget 4.5. Not a lot of money to spend. Billet crankshaft, di-lithium pistons and neutronium rods would be nice but spendy.
I did find I have the AX15 tranny in there. Didn't know if it was the AX15 or the Peugot. Now I know. At least I have that.
Last edited: