Cold Start Cylinder Misfires

[old_man]

Home Depot has those exact same connectors. Just cut the wire right at the old crimp terminal, then trim back the insulation and dip the wire in some baking soda in water to neutralize the corrosion before clamping it down.

 

[GamblySmurf]

Finally got to the bottom of it. Bad injector. Replaced with the four hole upgrade set from ebay.

 

[Ecomike]

Great, what about the ground issue?

 

[GamblySmurf]

Great, what about the ground issue?

I repaired that as well, but I don't think it was the root of any specific problem.

 

[Ecomike]

One way to find out, disconnect it.:shiver:

 

[GamblySmurf]

One way to find out, disconnect it.:shiver:

I swapped injectors around and repaired the ground. The problem followed the injector to another cylinder, even with the ground fixed. Replacing the injectors fixed it right up.