RichP
NAXJA Forum User
- Location
- Effort, Pa
Thought you might like a look at this one. Local bmja member built it.
http://www.bmja.org/forum/showthread.php?t=27509
http://www.bmja.org/forum/showthread.php?t=27509
C85D4x4 said:Is that masking tape under the springs!!! :laugh3:
Gravesdiggerxj said:looks like a urethane coil bucket and/or isolator.
I guess my computer screen isn't awesome, but other than painting a heim red all I can see is the track bar isn't quite parallel with the drag link. Is it single shear at the axle side or tractor rod ends? He could probably ditch the high steer arm spacer, but that rear truss is beafy, I like how it's tied into the diff cover bolts.
Dont be bringing my name into this!Wil Badger said:
As many have pointed out the pan hard bar is all wrong.First its at a bad angle to the drag link.Second its not long enough.You want to have the track bar as long as it can be or as close to the length of the drag link as possible.
The white isolators under the springs is Starboard also know as poly board.Its what comes with the Clayton kits