Unclewolverine
NAXJA Forum User
- Location
- Kansas
is there a way to tell if the regulator in the computer is going bad? I've had low voltage ever since I've had this thing, big cables did not make a difference. It runs 12.5 or so normally but if I turn the ac on high it goes down to just between the red and that hash mark on the gage. I finally had time to take it off and drive to town to have it tested, but of course both testing machines in town are down! Had to put it back on because I may have to work tomorrow. Too darn expensive to just put a new one on to try it and no junk yard units available. This is my 95 RHD, my old 01 always sat at 14 no matter what. It is a 90 amp alt that had been replaced in 14.
Or is there an internally regulated bolt on unit? It has to be the same size, RHD alternators set higher and with a little age on the motor mounts they even rub the battery tray!
Or is there an internally regulated bolt on unit? It has to be the same size, RHD alternators set higher and with a little age on the motor mounts they even rub the battery tray!