freerider15
NAXJA Forum User
- Location
- FoCo, Crawlorado
Well this has now become a PITA, and Im hoping to resolve it. My Uncle and I worked on this for a couple hours and no luck. My door locks (electric on drivers side) stopped working some time ago. Everything else works except the door locks, well the windows can be tempermental at time to where only the driver can control them. We checked both passenger and driver's side solenoids, switch boxes, and drivers side wiring harness, and they are all good. We traced the wires from the drivers side solenoid which are red/blk and orange/blk to the male female connectors under the kick panel. What I need to know is what happens to them after that, color wise, etc. All this was done with a professional multimeter, and tried using a Haynes Manual wiring diagrams but they...well...suck! We checked all the fuses under the passenger side kick panel, and the fuse box under the hood. The multimeter said that the fuse wasn't getting an power, just a spike to the needed 12V when turning the the key to the spot right before ignition. The wire actually giving power in that plugs into the box of switched on the drivers side is not recieving any power, but everything else is. We checked to hot plate under the fuse box, made it so the spade connector was actually holding and touching the fuse, since it appeared to be not, but still nothing. There is a red/grn wire coming into the fuse, but I wasn't able to trace it back. There What else could be causing this, any ideas, input. ANy help is welcome, as i hate electrical sh*t. If anyone has any FSM's of the wiring, please send me some of the schematics as the page Ryan tried giving in the sticky up top no longer works. Thanks.