snow580
NAXJA Forum User
- Location
- Arlington,Mn.
I did a rear disc swap for a friend on a 14bolt using 1/2 ton chevy calipers and installed a 86 e350 master, took the prop. valve out, and bled the crap out of it and the pedal still goes pretty much to the floor. I capped the rear line at the master cyl. and the pedal now feels real good. My question is could the stock 3/16 brake line running to the back possibly not allowing enough flow to the rear? If so would a 1/4 line be enough? If not does anybody have any other ideas what could be causing this?
Thanks in advance!!
Jake
Thanks in advance!!
Jake