Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Will someone please post a picture of where the blower motor housing is on a 98? I searched and found a thread about having to remove the washer fluid bottle to get at some of the bolts but that was on a 96. Is it the same as a 98?
The blower motor is on the passenger side firewall under the hood. It says in FSM it is accessable under hood without without removing A/C heater housing. I looked at my 2000 & all the A/C lines are in the way. I believe 98 & 2000 are simmular. If your blower is not working check the blower motor relay & resistor under the passenger side of dash first. It's easier to get to & they go bad also. My resistor burned one of the resistor wires off inside the blower box. If blower motor has to be replaced & you have A/C, the system has to be drained & A/C accumulator has to be disconnected & moved to get at blower motor.
Thanks alfman-I've just got a terrible chirping noise when the blower is on low speed, the blower still works though. Man I need to get a FSM. I've found a place to get them for $98.