Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
what should i do about a bad cardon joint in my front drive shaft. is there any junk yard swap or upgrade. should i get a whole new saft made or what??? i could use some help.
80 bucks in parts plus the tool (and ill admit id love to have that tool), or just pull a junkyard front ds for 50-60 bucks. then you can even rebuild the other one later for a trail spare.
Nearly all of the time it just needs two new u-joints, standard 1310 joints for less than $20 at the parts store. It's a bit of a puzzle getting it apart and back together, but you can do it. We've rebuilt them on the trail. It's easier with a ball joint/u-joint press, but the old fashioned hammer and socket method still works.
I've used two junkyard front drive shafts and they worked great. . . still on the second one. I've also tried to rebuild one. I couldn't quite get the double cardan back together right. The rubber boot was dried out and it didn't go back together very well. I put it on and it vibrated at about 40 mph. I kept it and use it for a trail spare.