RamlebXJ
NAXJA Forum User
- Location
- Wilmington NC
Alright, well I got the jeep started, and noticed there was no oil pressure. The other night while I was taking things apart I noticed a good ammount of carbon build-up under the valve cover, tore it apart real quick and gave it a quick cleaning. Today I got it to the point of turning over, turned strong and tons of black smoke came out, it actually stained the driveway! Now tomorrow I'm going to be pulling the oil pan, theres no leak on the rear main seal, but i want to cover the bases on this. What should I look for when I pull the pan? I threw some marvel in the oil the other day when I changed it out & put a new oil filter on it today. I'm thinking after I change the pan I'm going to throw a quart of atf in there, it worked for me on other engines in the past. I don't hear any knocking or ticking from the enging, there is a clank but it seems to be from the mechanical fan. Any advice is welcome, Ive only driving it about 200 yards and let it Idle for about 15 minutes to help break up the carbon. Anything else I should do?