89 MJ with a 95 4.0L, AX-15, 3.8:1 Atlas2, Rusty`s 8" Long Arm Front, Spring Over rear, Dana 30 Frt with Warn Hub Conv.(5x4.5), Warn shafts, LockRight, 4.56 (housing bent a little,but runable), Rear Dana 44 with full Spool, 4.56 (one bent axle flange but not bad), AGR box & pump, 1 1/4" .250wall draglink and tie rod with 3/4 Hiems, Also frt trackbar is .250wall 1 1/4" with hiems, Custom bumpers, GDI Rad, IPF H4`s, 35x12.5`s on 15x8 Rock Crawlers (I already sold the 37`s and beadlocks and winch).
Now for the bad news, I tore the steering box off the frame in Sept, pulled one bolt completely thru both sides of the frame and broke the other two off. ORGS has the fix for this for under $100. As for the bent frt houseing I have a straight one that is empty that I`ll let go with the truck. The body is pretty beat up after 5 years of wheeling. The doors are removeable without tools. This truck does realy well off road I don`t want to sell it but am forced to. The Atlas and drive shafts only have two Tellico trips on them.
$3500 e-mail me with any questions as I don`t get to check the forum regularly, [email protected] , I can take and send pics of anythig if you are interested.
Now for the bad news, I tore the steering box off the frame in Sept, pulled one bolt completely thru both sides of the frame and broke the other two off. ORGS has the fix for this for under $100. As for the bent frt houseing I have a straight one that is empty that I`ll let go with the truck. The body is pretty beat up after 5 years of wheeling. The doors are removeable without tools. This truck does realy well off road I don`t want to sell it but am forced to. The Atlas and drive shafts only have two Tellico trips on them.
$3500 e-mail me with any questions as I don`t get to check the forum regularly, [email protected] , I can take and send pics of anythig if you are interested.
Last edited: