01classicxj
NAXJA Forum User
- Location
- Dickinson, TX
Hello all. I am closer to starting on the finish of my 2wd to 4wd conversion. So i went to my storage to look at the 1999 tranny/transfercase sitting there. They are still mated. Wiring harness, dipstick tube in there as well. Pulled both driveshafts off to make handling easier. It's laying across a four wheel dolly. My question is about hooking up the speedometer that the sensor is now in the transfer case. It has three spade connector and what is the other big round thing with a plug sitting straight up on the transfer case. I crawled under my cherokee and looked at the 2wd connections. It seems that my speedometer connection might stretch further back once i install the 4wd tranny /transfer case. I unplugged my 2wd connection and it has three spades as well. Is this correct?