Mike H.
NAXJA Forum User
- Location
- phoenix az
currently running 33's on 2.5" of lift.
axles are geared at 4.56, and I run a 4:1 in the transfer case.
Thinking real hard on 35x10.5's.
Thinking of doing the shackle angle mod, which results in approx 1" of lift, and would get 1" longer coils up front to level.
So, the rig would sit at approx 3.5" lift.
So;
Anyone running narrow 35's on a small lift?
What troubles did you run into?
Anyone running 35's with 4.56's and 4:1?
Pretty sure on road will be ok... experience anyone?
Off-road (mostly rocks) does anyone hate the gearing/tire combo?
I'd like ro run 5.38's, but new axle housings are not in the budget at this time.
In going to 35's I would do heavy axles on the d30 and 8.25, so, any input on that would be welcome.
axles are geared at 4.56, and I run a 4:1 in the transfer case.
Thinking real hard on 35x10.5's.
Thinking of doing the shackle angle mod, which results in approx 1" of lift, and would get 1" longer coils up front to level.
So, the rig would sit at approx 3.5" lift.
So;
Anyone running narrow 35's on a small lift?
What troubles did you run into?
Anyone running 35's with 4.56's and 4:1?
Pretty sure on road will be ok... experience anyone?
Off-road (mostly rocks) does anyone hate the gearing/tire combo?
I'd like ro run 5.38's, but new axle housings are not in the budget at this time.
In going to 35's I would do heavy axles on the d30 and 8.25, so, any input on that would be welcome.