Sumo2014
NAXJA Forum User
- Location
- Queen Creek,AZ
Have a 01 jeep XJ automatic transmission 4.0 for a couple of months now I’ve had a no buss And would not start I checked my 5 V reference add all the connectors that was good. On the cluster the gas gauge and volt meter did not work. I tried a different cluster no change. I changed the crank positioning sensor still would not start. So I got a PCM installed now the Jeep starts runs for a few seconds then shuts down check fuel pressure get about 45–47 psi. When it starts I can keep it running with starter fluid.Any ideas what I can check next fuel injectors? What should I be looking for? Any help would be appreciated kind of at a standstill right