userbmx1315
NAXJA Forum User
- Location
- Dallas, NC
how hard is it to switch a 98 2wd xj to a 4wd? i have a wrecked 97 xj 4x4 for parts any hard wiring?
userbmx1315 said:yea thats also what i was thinking. i could get a 4cyl thats 4x4 and swap a 4.0 in it (dont kno how hard that would be. how to wire it up) or get a 4.0 thats 2wd and swap it to 4wd. moneys kinda low
rockclimber24315 said:I'm by no means an expert but essentially everything under the body. You'll have to take off the 2wd adapter from the t-case, and then put on the t-case, and switch out the front axle, Then you'll have to get the driveshaft lined up to the t-case, which should be close to where the tailshaft of your trans used to be. You'll have to cut a hole in your floor for the shifter linkage, and wire up the 4wd lights. Then you''ll have to reroute the speedo cable to the t-case. Thats about all I can think off of the top of my head.