14 bolt from a CUCV

[bmanga]

Here is what it has:
- 4.56 gears
- Detroit Locker
- FF
- Partially shaved (within 1/8 of bottom bolt)
- New Yukon bearings (not put on yet).
- Set of freshly turned rotors
- Mocked up tube diff cover (needs finished)
- perches still on it (have replacement ruffstuff set I'll include if needed)

Currently axle shafts are out, hubs are off and rotors were just turned but not mounted to hubs. As it sits now and I'll throw in a set of ruffstuff perches if doing leaf springs and the rollers in the pic below for $425. I will be at Mountainside ORV on Labor Day and can bring it with me.

Pics were before rotors were turned and pulled apart. Axle show upside down to show shaved parts.

[URL]http://www.pirate4x4.com/forum/attachment.php?attachmentid=541056&stc=1&d=1281439858

http://www.pirate4x4.com/forum/attachment.php?attachmentid=541057&stc=1&d=1281439858

http://www.pirate4x4.com/forum/attachment.php?attachmentid=541058&stc=1&d=1281439858

http://www.pirate4x4.com/forum/attachment.php?attachmentid=541059&stc=1&d=1281439858[/URL]http://hardlinecrawlers.com/forums/index.php?action=dlattach;topic=8784.0;attach=6265;image

 

[Stallacrew]

Can't see the pictures; have to sign in.

 

[bmanga]

Can't see the pictures; have to sign in.

Linked to pirate now. Hardline doesn't allow viewing unless signed in. My bad! :eyes:

 

[bmanga]

NEGO of course.

 

[RenegadeStang]

Getting rid of the 14bolt?

 

[bmanga]

Getting rid of the 14bolt?

All depends! I have two spider 9 housings arriving next week. :yelclap:

 

[southernrebel20]

If you're going to a 9" I have a thirdmember with new 4.56 gears, a new 31 spline spool and new bearings and seals that I would trade you for the 14 bolt. I've decided to go with a 14 bolt and yours sounds good.

 

[bmanga]

Thanks for the offer but I'll pass. The 9's are for a mid-engine moon buggy I'm going to start. I may keep the 14 bolt for the XJ until the buggy is completed. Still pondering it all......

 

[bmanga]

No longer for sale.