Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Note from DJ
Thanks for reporting back your findings.
Here's a link to Crusier's Mostly Renix Tips." He was a teck on the floor at Jeep for years, we are super lucky to have this info.>> http://www.cherokeeforum.com/f51/cru...x-tips-153657/
If you don’t have this link book mark it; it is...
Note from DJ
Sorry for the long post but I’m going to offer my 2 cents for consideration hear.
OP keepwishing in your post #8 you posted:
Quote;
“Just rechecked and here are my findings.
Key off= power to 30
Key on= power to 85, 86, 30
Start= power to 87 voltage drop in 86”.
You shouldn’t...
Note from DJ
Here’s a couple links on rear drum brake:
http://www.lunghd.com/Tech_Articles/Suspension_Steering_Axles_and_Brakes/Drum_Brake_Service.htm
------------------
http://www.naxja.org/forum/showthread.php?t=1006765
--------------------------------
Tip:
1. Only take one side at a time...
Note from DJ
I don’t know if this link will be of any help or not:
[Non Tilt] an interesting write-up from car Craft Magazine, with an exploded image of the column
http://www.carcraft.com/howto/56459/index.html
Note from DJ
Vacuum Diagnostics
http://www.fordf150.net/howto/diagnoseengine.php
http://www.naxja.org/forum/showthread.php?t=1002311
Also some other vacuum interpretation sites that I found in my search:
http://www.therangerstation.com/Maga...acuumLeaks.htm...
Note from DJ
Please don’t start throwing new parts on in hopes of fixing your Jeep!
Quality control is poor in a lot of replacement parts now days; some are even defective right out of the new box.
Don’t be afraid to ask questions and keep every buddy posted as to where you’re at.
There are...
Note from DJ to ehall
Go to the junk yard and gather up 6 matching male and female 2 wire connectors and cut then lose, take them home and push the connector out the open end of all 12 parts.
On the way home stop by your local NAPA and tell the counter person you want 12 each of the following...
Note from DJ
It has a manual transmission that means that it has a hydraulic clutch system.
There is push rod which is attached to the clutch pedal that activates the clutch master cylinder when the clutch pedal is depressed; if the clutch master cylinder has leaked or is leaking this rod is...
Note from DJ
Standard Motor Products TX28 Temp Sender/Sensor goes in the block
88XJ Renix Block Coolant Temperature Sensor and
Intake Manifold Air Temperature Sensor
To Resistance Value
Fahrenheit—Celsius—Ohms
212*-----------100*--------------185
160*------------ 71* ------------ 450...
Question from DJ?
Did you use Automatic Transmission Fluid then Acetone or ATF thinned with Acetone?
Originally Posted by Miller88
Sprayed them with penetrating oils (PB Blaster, ATF/Acetone) and they came right out! No airgun needed.
Note from DJ
I don’t know if this information will help
1988-90 Jeep Cherokee Stereo Wiring
http://www.the12volt.com/installbay/stereodetail/1150.html
Constant 12V+ is Pink
Switched 12V+ is Purple/Orange
Ground is Black
Illumination is Orange/Black
Dimmer is Dark Blue/White
Antenna Trigger is...
Note from DJ
This information may help you identify what the previous owner swapped into your Jeep
Block casting number location can be found hear in post # 2 by CJ7-Tim
http://www.jeepforum.com/forum/f11/4-0l-serial-number-location-995174/
Head casting number by years
It is easy to...
Note from DJ
Thanks for the information firehawk618.
I’m including this information for those that might want to check out there’s.
Information from: http://www.lunghd.com/Tech_Articles/Engine/Basic_Sensors_Diagnostics.htm
TEMPERATURE-TO-RESISTANCE VALUE for Renix
Manifold Air Temperature...
Note from DJ
Why are you replacing your fuel pump?
If you hear it running during the priming cycle the pump may be OK.
You may just have a plugged furl filter.
Or when you remove your old pump you may find that the one hose that has been submerged in Ethanol diluted gas has become soft and...
Note from DJ
Gates Fuel Line Hose Information
http://www.gates.com/oreilly/tech_tips/PermeationResistantFuelLineHose.pdf
Recommended: Fuel Injection (SAE 30R9)/MPI Hose
Fuel injection (SAE 30R9) or MPI (multi-port injection) hose is reinforced to handle higher pressures up to 180 psi. It can...