Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Do you have the measurements on the spindle Pilot diameters(Part that sticks into the knuckle) and the Diameter of the hole in the Dana knuckle. I have a set of Chevy 10 bolt spindles for a 90 Suburban the Pilot is a lot smaller the unit bearing Pilot. I am waiting to get some jeep D44 spindles...
My buddy hydro locked his jeep In the canals south of Wilmington de he is looking for 97- 99 jeep 4.0l mile age range 0 -120,000 . He has a budget of $400 max Needs to run. perfer near 19350 zip
Looking to by a CJ Dana 30 to build a custom dana 30. Hopping some here may have a empty housing layiong around. Looking to spend 50 - 60 dollars on it.
98 and up Izzue d44 Housing can be clearance slightly and run the JK ring, Pinion, and lockers. The pinion is the same size a d60. They are 63 ish WRMS get some custom shafts for it match the front. Re drilled S10 rear disk keeps the rotor hub centric. Or you can do what i am going to do. mod...
Lift
Lift : Total Cost was around $650
For the lift I pieced together the front lift from used parts found all over the place. It consist of 4 inch Jeep TJ Coils form Rough Country, 2 inch BB spacer, and stock isolator. The control arms are Rock Krawler adjustable upper and lowers. The track...
Thought I share. This is also on Jeep Forum Link
It’s time to start a build log of my 1996 Jeep Cherokee. This will not be a super fast build I work a lot of hours and have a six month old daughter that occupy a lot of my time. I get about 1 day a month to do stuff to the jeep.
I used to be...
What year is it ? done both ac systems on a 99 and 96 I got the parts in a varity of places Rock auto, dealer ship, jeep air, and Ebay. I shopped a round for the best price on both. all the part cost me about $550 Spent anther $200 on a set of disconnect tools, guages, and Vacume pump.
12 hr...
I got a 96 4x4 with the 4.0L I am getting ready to regear, sleave, truss, and Gusset my D30. I have an axle out of an 88 i want to throw under it while i work on the project.
My question is will the 96 brake parts swap to the 88. The 88 brakes look scary at best and the 96 are brand newish...
37 On the Turd will be pushing it for sure.
About the only thing left housing wise would be to Tie the diff cover to truss and maybe add the gurld mod Jana Did on Pirate.
with the full case locker and cromo shafts you have 2 Fuses the hubs and ring gear.
I like to see some one try to throw...
You have to Cut the crap out of the tera bracket to get to work with the AX15 in you have a 00-01 with the NV3550 then its basicly a bolt in.
5 Speed FTW !!!!!!!!
I have a Hp Dana 60 Housing. It has the King Pin Inner Cs, bearing caps, and Cover.
looking for $250
I also have a Hp Dana 30 out of an 88 jeep Cherokee. Gears are 3.55. It is a vacuum disconnect axel.
Looking for $100
Thanks
James
Location Landenberg pa 19350
Pics to come !