Search results

I just sent you a PM Lets talk on phone

Need a steering column for my 90 xj Larado My tilt column broke Will take tilt or non tilt so long as it can be installed in my xj

WTB steering column for 90 xj Mine broke and I need tilt or non tilt Anyone have one in good shape they want to sell

strangely enough I got it working again by jiggling around and repositioning one of the relays on the left side forward near the front of the jeep, I guess there was a loose connection on one of the relays, and twisting it so the relay stays in a new postiion seems to solve the problem at least...

Thanks, how can I find the fog lamp relay, is there a picture as to what it looks like.

when you said you ran wire to battery then to switch, do you mean to ignition switch, how do I find where to connect to the ignition swich is there a link for Hayes, I couldn't find anything One wire from fan is grounded, that works fine, I need to get power to the other wire from the fan...

When I bought my 90 xj the previous owner had revbuilt the engine as a stroker and installed a 2nd fan which was powered by the battery and turned on and off with the ingnition switch. For some reason it stopped working yesterday. The fan works fine when connected directly to the battery...

I just installed new rear leaf springs, and I think I am detecting vibration when accelerating at low speed. I have an extended shackle, could shims help, I can't figure out how putting a shim on the lef pack which is above the axel would would improve the driveshaft angle--it looks tome...

TPS got wet from leaks in hood vents. My xj auto trans won't shift out of first till about 4500 rpm, and shifts erratically. Assuming its the TPS can I do anything to fix it, dry it, whatever, or do I need to replace. Last time this happened it spontaniously fixed itself after 6 weeks or so...

Ok I found it, next question is can I fix it or do I have to get a new one. What do I need to do to try to fix assuming it got wet,.

My 90 xj won't shift out of first. Was fine when I parked it. It rained a lot and now can't shift out of first. Had problem before. Was told it was wet throttle position sensor. Eventually it dried out and worked. I don't want to wait weeks for it to dry out. Where is the darn thing. And...

I'm looking for 3 or 4 degree steel shims for rear leafs

I need one or two 3 degree shims.

How high do the Walmart stands extend to.

Thanks for the advice everyone. I'll have to digest it. I have nothing against jackstands. But Just for the record, the boards in question are 6 inches thick, 18 inches wide and 30 inches long. Placed crosswise under the rock rails I would think they would be far more stable than any...

I am about to replace my rear leafs on a lifted xj. Do I need to jack up both sides and the pumpkin, or can I just jack up one side, take off the wheel, replace the spring on that side, then lower that side and jack up the other side and do the same thing. I am going to use wood boards flat...

Don't know how it rides, haven't put it on yet. I'll post after I test it for a whiile. Pretty cheap way to get a lift though. I'm not sure which year s-10. You might check other threads in the forum searching for "s-10" .

The pack has 4 leafs plus the overload (that includes the original xj main leaf) I usually have a lot of heavy tools in the back, plus camping gear. I was told by the person who I got the set up from it provides 3 1/4" lift and I should get another 1 1/2 inch from my 6 inch shackles (1/2 of...

Ok here's a basic question about leaf springs. When the spring changes shape the top leaf has to get longer when it flattens out --doesn't it?. The other leafs just slide, when they get flatter, but the top leaf is bolted in. Where does the extra length on the top leaf go?.

I just got leafs for my 90 xj with 31 inch tires, to replace my worn budget boost springs. The replacement leaf leaf system is a modified leaf system with an xj main leaf and 3 leafs from an s-10, plus the flat overload leaf. Question is should I keep the flat overload leaf or take it off...