Search results

1995 Jeep Cherokee XJ 2 door 4.0 liter I6 4x4 117,xxx mi. Standard Transmission Recently passed NYS Inspection mp3/cd player 3" Rusty’s full spring lift with 31" tires...only a year old. Lots of tread left since I’ve barely put 3k on this jeep since I bought it and lifted it. New...

i have a steering issue and i was wondering if it could be attributed to shot tie rod end fittings. Everything else seems pretty tight but when im driving it will take an extra inch or two of turning the wheel before it responds. 3" lift, 31's, 4.0, standard....also the tie rod i speak of is...

Im running a 3" rustys full leaf and coils lift right now and im interested in going higher to run 33's. money is tight, but at the same time i want to do it right. your opinions count beyond words so let me know what you think. TIA.

Metal tube snapped at the tcase. Ive tried to braze it back on and JB weld it 2x....keeps coming off. Id like to get it back on there to keep dirt, etc.. out but dont know how to adhere it back on. Anyone get any suggestions?

Hey guys quick question. Just installed a new muffler (cat back) and the install went smooth but now im seeing some smoke come from it after it heats up. Everything seems to run fine but after about 5 minutes or so, or whenever i really push the jeep, the muffler will start to smoke out of the...

The ones on the tranny that allow you to thread a bolt in from underneath the crossmember - theres four of them, the front two have cracked for some reason while i was puttin the bolts back on. I may have gone to tight with them although it didnt feel like it at the time. Anyone else had this...

Is it alright to fill up the ax15 from the shifter hole on top?? just making sure to stop pouring when its at the bottom of the filler hole of course...

Ive gone through 2 new seals trying to replace it. Not sure what im doing wrong but every time i try to press it in (using a vice + piece of wood) it doesn't go in, just kind of crumples. ive used some grease but not sure what else i can do.

Im trying to replace the clutch in my 95 XJ, I do have the haynes manual but im looking for some advice here as well. The first issue i have run into is trying to take off the pressure plate - it will rotate the whole flywheel when trying to loosen those bolts. I understand there is a special...

its out of a 2wd '97 dakota....will it swap into my 95 XJ? I should be able to use the bellhousing out of my old ax15 for it to mount up im guessing, i just dont know if it will be able to adapt to my np231.

Just like the title says, im looking to replace the ax15 in my '95 XJ. Located just north of Albany, ny.

Quick question....when you remove the tranny do you have to support the engine? im pretty sure it says to in the haynes but wasnt sure that made any sense. Also any tips for getting those 2 E12 torx off? I got some long extension and will pick up the socket tomarrow.

so my alternator seized up on me and im gonna do the water pump while i got the belt and radiator out....but im having trouble removing the fan to get to the alt. and the pulley for the water pump... do you have to do this with the serp belt on or is there any easier way to do it? i tried just...

I think i need to replace my transfer case, np231, and i need to find a replacement. It seems they are pretty tough to find at a good deal but even harder to find out of a manual tranny jeep. My question is will i be able to get a np231 out of any aw4 cherokee to directly bolt into my 95 xj with...

95xj ax15 np231 3" lift powertrax noslip. Went out the other night and couldnt get it to engage in 4lo, only 2hi and 4hi. Came back, parked it and let it sit for awhile, started it up and went into 4lo just fine. Then today, i drove to the trail ok, went to put it in 4 lo and worked for a...

Is the synthetic royal purple lube ok to use in an ax15? It says that it meets gl-4 and gl-5 specs, but im worried about it eating up the syncros. I went to NAPA and auto parts plus, both stores dont carry anything but gl-5 lube. Im thinking that i should have just got some mobile 1 10w-30 btw...

I put in a powertrax noslip into my 8.25 27 spline today. Everything went pretty good and seemed straight forward until i went to do the spin test. The problem is, the wheels do not turn at all when in gear. I try turning the driver side in gear and it does not go forward or backward, and the...

95xj 2dr 4.0l 5spd. I currently have a 3" rustys full spring pack installed with 31's. Im looking to go a little bigger, but i just want to hear from you guys how much more you think i can lift it on a budget of $300-$400. I would be selling my 31s to upgrade to either 32s or 33s. I dont really...

Im in the market for a new locker (or used) but i just wanted to get opinions on the best setup for a locker and the 5 spd tranny. Im running a '95 xj 8.25 27 spl rear. Looking to get it locked, but i'd like to know what works best on and offroad with the 5 spd. I've read that a detroit locker...

Im in the market for a new locker (or used) but i just wanted to get opinions on the best setup for a locker and the 5 spd tranny. Im running a '95 xj 8.25 27 spl rear. Looking to get it locked, but i'd like to know what works best on and offroad with the 5 spd. I've read that a detroit locker...