Search results

Does anyone have the size and threadpitch of the main motor mount bolts for a '95 4.0 ? Dealership is going to take a couple of days to get them for me...

My XJ has been sitting for over a year with no front axle. It has been exposed to the weather (no doors in front) and has not been sheltered. I have started it every so often and it has been infrequent enough that I usually have to charge the battery. Yesterday I charged the battery and today...

So I thought we used to have a tech forum for non-xj questions, but this question will hopefully involve my XJ someday... A friend is selling a 1984 Mercedes 300TD with around 280,000 mi on the clock. Decent condition, test drove it today and the tranny shifts hard & there's a little bit of...

So I bought an isuzu d44 and it came with a flange that *looks* like it'll work for whatever joint came stock. Part is spicer C2-2-721, I've done quite a bit of searching and reading old threads on here. Just wondering if anyone knows if this is the part I need or if I should look for another...

HP Disco 30 out of a YJ, I want to take the R & P spider and carrier and put them into a HP30 non-disco housing out of a '97 XJ. Should work, right? Not too up on YJ axles so please point out what problems I might see.

As title says, the factory 29-spline rear from my '97 XJ is for sale, its 3.55 and has ZJ discs. Been on the beast since I bought it in '03 I put the discs on 2 years ago or so. Junkyard backing plates, reman calipers and new rotors/pads when I did the swap. Used with nothing bigger than 33s...

Okay, trying to buy a set of 4.56s from a dude on here but he's not sure if they came out of an HP or LP, apparently it came out of a friend's XJ but he never saw the axle and... Well, I'm familar with terms like the "coast" and "backlash," but I'm familiar with them the way a dog is familiar...

Wanting to relocate my shackles further back. I have a bumper fabbed that ties into the stock bumper mounts and the stock hitch mounts. I can't remember exactly but I think the angle iron that acts as the nutserts goes back like 15"+ into the framerails. Is this sufficient for suspension? I've...

'97 29-spline 8.25 w/ ZJ discs 3.55 gears $300 '94 Non-disco HP30 W/ big joints 4.10 gears $200 4 33x12.50x15 BFG M/T mounted on Alum american eagle rims w 4.5" or so BS 5x4.5 with about 1/2 tread plus another of the same rim with 33x12.50x15 all terrain spare (don't recall brand but has good...

I'm thinking about some tube doors and in the course of my searching I came across a thread on jeep forum where people were claiming that YJ doors fit XJs... I couldn't find any other reference to it on the intarwebs. I'm hoping someone can clarify, it seems to me that wouldn't work. Also...

The good: Been dding it for the last 4 years or so, never had problem 1 with the mechanical side. 4.0/AW4/231 W/ 118k on the odo Inspected through APR '09 33x12.50/15 BFG M/T TA KM with more than 50% tread left 5x15"x8" American Eagle alloys with 4.5" BS + All-terrain 33x12.50 spare (good tread...

So I happen to have 2 stock d30 covers right now... I've been wanting a thicker cover to stiffen things up a bit. Was thinking of welding one to the other to get me a free thicker diff cover. I know its cheap, but the other axle is just going to sit in the boneyard so I may as well get some use...

So I've found a toy rear from a 99 taco for $150 geared 4.10 w/locker and it looks like it'll be the cheapest way to match the 4.10 d30 front I have. I've searched quite a bit but I can't find a definite answer to some questions... 96+ yota rears are 60" WMS? The rear is about 50 miles away...

So here's the deal, I bought a 27 spline rear end that was supposed to be geared 4.10 and it turned out to be 3.55 No big deal, the seller did what he needed to make it right but now I've got it and don't need it. I have a 27-spline (year unknown) with 3.55 gears, gears aren't in the diff but...

Need my rear axle re-geared preferrably near Boone. I've been quoted $300 and that seems too high to me. Can have axle torn down and I'll have parts all ready to go.

I'm looking for any tips when it comes to modifying axle housings. My biggest concerns are heat/warpage and machine selection. I've got a 175 amp lincoln mig that I use mostly and I'm most comfortable with it. I've also got an old gas powered miller stick that gets better penetration than my...

I've done some searching and can't figure out if there's any way short of pulling the shafts to determine the spline count on an 8.25. Anyone know off the top of your head if you can see well enough to count the splines with the diff cover off? What I'm really hoping for is a stamped or cast...

So I recently found a set of 4.10 axles to swap for my hp30/8.25 combo that's geared 3.55 and I'm planning on just doing a straight axle swap then throwing my 29 spline shafts and zj discs on and calling it macaroni. Since I'll have the front end dropped from the vehicle I'm thinking of taking...

In need of a shaft or pair of shafts for a '97 (big joint) hpD30, preferrably in WNC or eastern TN. Paypal waiting, its my DD so I gots to get it rollin again. I need both inner and stub shafts, the driver's side is broken but I understand if people only want to sell in pairs.

:guitar: So I got snow stuck and snapped my drivers side shaft at the ears and stub shaft ears. Question: Can I drive it without the front shaft in as long as I've got the stub shaft still in? And does anyone have a 97 (big joints) HP30 drivers front shaft and stub shaft for sale? All unstuck...