Search results

from what i have heard the auto and the manual t cases have a different length input shaft? i have also heard of different spline counts i cannot fine a manual donor here and don't want to remove mine until i have the means to fix it

i currently have a manual 1999 cherokee with an np 231 and SYE the chain in my t case seems to be skipping. in comparing prices it seems to me that the best thing for me to do is buy a used t case and reinstall my SYE if it is still good. i have decided this was the best bet because i...

ohioman i actually put a new front end in last week......mine was bent but still popping in 4wd vahasnowaves... that sounds like a great idea but would need more info to get into that. sounds like your saying to just rebuild mine with those better parts? i was thinking about the wide chain but...

Assuming I can get away with just replacing the chain and shift fork tabs, does anybody know where I can order just those parts? And also I wonder if just getting a junkyard t-case ($300) and using my existing SYE may be an easier option. I know mine has black fluid in it and has been through...

Seems like I can do the job with the t case still bolted up? Even leave the front shaft om I guess???

I have a 99 xj with an re 5.5 and a SYE the truck is manual and has a 4.0 I don't even recal if this is the t case from my 96 or from this truck but it worked fine until a few months ago It started while towing trailers of wood out of the woods and I would hear a pop sound every so often but...

so now i am having a little confusion with what u joint to use on the 1995 dana 30 with abs. i know the u joint should be 5-297x my part store says it is the moog u joint 377 (picked one up this morning at the part in the box says 371) good job part store i had a 371 laying around anyway...

well i measured 2 3/4" on my 99 rotor so it is a late year model and the axles are not compatible. i will just fix the donor u joint and take the new rotors and pads (my 99 rotors are done) i believe i can also keep my 99 calipers because they should both be the same Chrysler calipers...

Let me also be clear about the known damage to the front end. When I hit the wall I blew out my driver side front tire and badly bent the rim. The hit crushed the driver side LC mount up to the axle tube, tie rods bent and the springs don't appear straight anymore and after changing bent...

i am going to check what rotors i have in a couple hours. the donor axle came with (what looks like) brand new pads and rotors and the calipers seem fine. best case scenario is that i use the donor (1995) dana 30 with my current passenger side axle and both calipers (won't have to bleed...

so for over a year now i have been driving around with a bent axle tube on my 1999 manual xj with a 4.0 and no ABS. I hit a wall on the highway on the driver side. I got tired of wearing out tires so i just picked up a dana 30 from a guy with a 95 manual and has ABS. ($100) after getting...

i thought i read someplace that this u joint is 30% weaker. i must have misread! thanks for the help.

is that right? well then i should buy this one!!!

I have a 1999 xj with 4.0 manual. I bent my axle tube a while back and now i have to change it. i know my axles have the 297x760 u joints. i also have the 3.07 gears, a new dana 30 with those gears are hard to find in my area. i found a good deal on a dana 30 with the same gears from a 95...

or fuse?

is there more than one ground for this?

thankyou sidewinder i checked those grounds but did not do it. the bulbs looked good as did the fuses and the switch is brand new. i guess i have to test some wires now. which wires is the question

I have a 99 xj 4.0 4x4 manual. my brake lights just stopped working seems to be only the brake lights. i have checked the fuses (#25 abs, cooling fan, climate control and brake switch) replaced the brake switch.... nothing, i have searched and it seems other people have multiple problems or...

i have played with the linkage and think it is the chain instead of the linkage i guess i wont know untill i open it but was hoping justa new chain would be the bear minimal. any good places for a rebuild that includes a chain? also really hoping the SYE is fine.

I have a 99 xj 4.0 manual with an np231 and an SYE sitting on 6' and 31-33" tires. here is how it started A few weeks ago i was pulling a trailer slow through the woods never pushing it. i would hear a pop if i was turning and asking for any kind of power i 4wheel but it wasn't consistent...