Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Ok, so interchangeable means I can use them and save myself a few $$$?
The injector harness thing doesnt really make it a deal breaker for me anyway. Ive already removed all factory loom to replace / repair, and planned to just use zip ties to anchor the harness back down.
Sweet! Thanks for...
Hey Guys,
I have to buy new bolts for my 1989 4.0 engine head. Curious to know why the 96-01 bolts are 1/2 the cost of the 84-95?
I can buy a set of bolts for 96-01 for $25, while 84-95 is $60!
Looked up pictures of both sets, they look exactly the same. So why the huge difference in cost? Are...
Tayln, Im stuck in a really low budget. Its taken me over a year to get where I am now in my rebuild. Im really hoping they will work, or Im out the money for buying them, and have to spend more to get something else.
You say you would not run them on any performance cam, but is there a slight...
The springs I have fit in perfectly. I think I will bolt it all together and spin the valve train around to see how it cycles. The spring ratings should be ok right?
So you dont think those springs will be ok with my cam? Its not a high revving engine, I got a hold of Engle. He said their springs have the following specs...
Spring OD 1.440” ID is 1.075”
At 1.700” 115 seat 215 to 230 open at 450” to 500” lift
Bind Height is 550” to 600" lift
After what Talyn said, do I subtract Bind Height from Installed Height? Because that would give me .685" Thats enough to clear my .476" lift with .209" to spare. Was I freaking out over the wrong numbers? lol!
Per Summit Racing, the specs of the springs I bought VS-1456
Number of Springs Per Valve:Single
Outside Diameter of Outer Spring (in):1.315 in.
Coil Bind Height (in):1.130 in.
Damper Spring Included:No
Inside Diameter of Outer Spring (in):0.961 in.
Valve Spring Style:Standard
Installed Height...
Hey guys, got myself into a bit of a snag.
First off, I bought myself the Comp Cams 68-232-4 camshaft. Then since I found out Comp doesnt have matching springs that fit out 4.0 head, I found on jeepforum.com an article that someone had said they were running the same cam with a set of Sealed...