• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Recent content by StratoXJ

  1. S

    Front end noise?

    Possible exhaust manifold leak. How many miles on your Jeep? Is it more noticeable when temp is cold outside?
  2. S

    Best sealant.

    Yes, it's from the join of the extension housing and transmission.
  3. S

    Best sealant.

    Sorry guys I gave the wrong info, wait about 5 min before joining and 24 hours before adding oil. I use permatex ultra specifically for oils black color bottle gray paste this time I will try high temp type paste. Thanks Mike
  4. S

    Best sealant.

    Hello everybody, own a '96 cherokee 230k miles automatic trans. I replaced the bushing on the extension housing and use a gasket making sealant design to withstand oils, waited 24 hrs for it to cure before I put it together and torque the bolts to specs. After about 30 days of driving it starts...
  5. S

    '99 cargo light question

    Thanks for replying. When the ovh console lights and cargo light are both on at the same time the accesory 10a fuse blows. I think it has to do with the splice I made for the ovhc by the passenger kick panel. Unfortunately I don't have a wiring diagram for a 99xj for the cargo light and ovh...
  6. S

    '99 cargo light question

    Hello, Does anybody know the wire colors and which does what on the cargo light or rear dome light for a 99 xj? Thanks
  7. S

    Electrical wiring question

    Hello everybody, I own a '96 Jeep xj and I replace the old headliner with that of a '99 xj with overhead console and integrated speaker enclosure. I got the console lights and compass display to work without using the old overhead light wiring connector but the cargo light keeps blowing a 10A...
  8. S

    AW4 extension housing bushing removal

    Thanks for the reply guys. I took the housing to a tranny shop, I was afraid of damaging it and for $10 they took the old one out and put in the new one. The mechanic drove it out towards the driveshaft end using a rod and what it looks like a socket the same size as the bushing after a...
  9. S

    Project Unicorn - a light duty trail rig

    Re: Project Unicorn: Hi Cal, how did you removed the old bushing? I took the extension housing out of the tranny but having a hard time taking the bushing out. Thanks
  10. S

    AW4 extension housing bushing removal

    Thanks for the quick reply. I'm still not sure by looking at the pictures from which side of the housing I remove the bushing.
  11. S

    AW4 extension housing bushing removal

    Hello fellow jeepsters, owned an 96 xj 230k miles 2wd automatic transmission. I managed to removed the extension housing because of trans. oil leak. The bushing looks worn and there was play on the driveshaft, after a couple of hits with a hammer and a deep socket the bushing won't move. Does...
  12. S

    Are all headliners interchangeable in XJs?

    Hello, I place a headliner from a 99 and overhead console on my 96 jeep it fitted perfect.
  13. S

    Possible tranny failure, please help.

    Thanks for the replies and suggestions. I changed the trans oil and filter and still behaves the same during stop and go. Changing the subject the FSM seems to be unreliable for fluid capacity. It states that after changing trans oil and filter add 2 quarts of fluid while the Haynes book...
  14. S

    Possible tranny failure, please help.

    Yes I use DEXIII. I will change it again. Do you think it needs flushing? By the way thanks for your help and suggestions. Mike
  15. S

    Possible tranny failure, please help.

    Don't matter if I press the brake pedal or not, if I slow down to make a turn, it will do it.
Back
Top