Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Sorry guys I gave the wrong info, wait about 5 min before joining and 24 hours before adding oil. I use permatex ultra specifically for oils black color bottle gray paste this time I will try high temp type paste.
Thanks
Mike
Hello everybody, own a '96 cherokee 230k miles automatic trans. I replaced the bushing on the extension housing and use a gasket making sealant design to withstand oils, waited 24 hrs for it to cure before I put it together and torque the bolts to specs. After about 30 days of driving it starts...
Thanks for replying. When the ovh console lights and cargo light are both on at the same time the accesory 10a fuse blows. I think it has to do with the splice I made for the ovhc by the passenger kick panel. Unfortunately I don't have a wiring diagram for a 99xj for the cargo light and ovh...
Hello everybody,
I own a '96 Jeep xj and I replace the old headliner with that of a '99 xj with overhead console and integrated speaker enclosure. I got the console lights and compass display to work without using the old overhead light wiring connector but the cargo light keeps blowing a 10A...
Thanks for the reply guys. I took the housing to a tranny shop, I was afraid of damaging it and for $10 they took the old one out and put in the new one. The mechanic drove it out towards the driveshaft end using a rod and what it looks like a socket the same size as the bushing after a...
Re: Project Unicorn:
Hi Cal, how did you removed the old bushing? I took the extension housing out of the tranny but having a hard time taking the bushing out.
Thanks
Hello fellow jeepsters, owned an 96 xj 230k miles 2wd automatic transmission. I managed to removed the extension housing because of trans. oil leak. The bushing looks worn and there was play on the driveshaft, after a couple of hits with a hammer and a deep socket the bushing won't move. Does...
Thanks for the replies and suggestions. I changed the trans oil and filter and still behaves the same during stop and go.
Changing the subject the FSM seems to be unreliable for fluid capacity. It states that after changing trans oil and filter add 2 quarts of fluid while the Haynes book...
The fluid is not red is like black. I had it changed at a trans shop including filter about 30k miles ago the jeep has 139k on the odometer. I change the fluid twice including filter since then because I notice the fluid is always dark color.
I check the fluid level after driving the jeep...
It only happens during stop and go, like driving out of my driveway or comming out of a parking lot. No matter if it is in reverse or drive the moment I put my foot on the brake and accelerate the rpms will go up and all the sudden the jeep will jump and starts moving. Once is cruising...
Hello everybody, I own a '96 XJ 139k miles with an automatic transmission. Recently it seems to slip when I shift it on drive or reverse I press on the accelerator and the engine will rev up and approximatly 5 seconds later it will engage 1st gear or reverse. Its worse if I hit the the brake...